Using an improper driver can cause problems that are not immediately apparent! If you are not the application provider (OEM), you should consult with your application provider to find out which driver is appropriate for your use. Our drivers should only be used if specifically required for driver support — either as a tool for software engineers or if directed by an application provider. Using our drivers when unnecessary can lead to a driver conflict that could be difficult to resolve! Please read the information below.
Most of our downloadable drivers for ARCNET Network Interface Modules (NIMs)
consist of several files compressed into one self-extracting ZIP
file. Several types of drivers are available for download, each
with specific characteristics. Various factors determine which type
is needed in a particular situation.
Our Technical
Notes provide detailed driver information beyond the following
brief remarks that should be read before choosing an option.
Null-Stack
This is essentially a packet driver — allowing communication by raw packets
having no protocol encapsulation. Each null-stack driver ZIP file
includes a programmer guide and sample Windows application written
in C. In Windows 95/98/ME, the enabler must be installed before
the null-stack driver is used. In Windows 2000 and Windows XP, Device
Manager will not list the null-stack driver as a network adapter,
but as a multipurpose adapter with a gray diamond icon.
NDIS (Network Driver Interface Specification)
An NDIS driver allows a single network interface module (NIM) to support
multiple network protocols and normally requires the use of a standard
protocol such as TCP/IP or IPX/SPX. When the NDIS driver is properly installed, Windows
Device Manager will list it as a network adapter with
the standard icon.
Enabler (Only for use with Windows 95/98/ME)
An enabler is not truly a communications driver. It is a simple driver
which allows Windows 95/98/ME to allocate resources to a NIM. After
resources are assigned, further driver functionality must be provided
by other software, typically supplied by the application provider.
As with the Null-Stack driver, Device Manager will not list the
enabler as a network adapter, but as a multipurpose adapter with
the gray diamond icon.
Note:
The enabler allows a DOS or 16-bit-mode driver to communicate with
the COM20020/22 located on our cards — but for a PCI20 which is
sharing an interrupt with another device, the application or driver
could have problems when interrupts occur.
ODI (Open Data-Link Interface)
Although mostly for Novell systems, ODI drivers work with various versions
of Windows and allow the protocol stack to be separate from the
actual NIM driver. Most ODI drivers run in Real Mode whereas NDIS
3.0 and greater drivers run in Enhanced or Protected Mode. Thus,
an ODI driver is usually limited to use with Win95/98/ME or DOS.
As with the NDIS driver, Device Manager will list an ODI driver
as a network adapter with the standard icon.
